- Epoxy Flooring – Reno, NV
Epoxy Flooring In Reno, NV
Seamless, chemical-resistant epoxy floors for garages, shops, and commercial spaces across Reno, Sparks, and Northern Nevada — installed on properly prepared concrete so the finish actually lasts.
●Licensed ●Bonded ●Secured
C‑5 #0090548 and C‑18 #0094850
● Free Estimate
Get your Reno epoxy floor estimate
Tell us about your space and we’ll follow up with pricing options for flake, metallic, or solid-color systems. No pressure, no obligation.
Three finishes, one durable base
Every system starts with the same properly prepared concrete — the finish you choose is about look, budget, and how the space gets used.
System 01
Full-Broadcast Flake Floors
Color chips are broadcast to full saturation across the base coat, then sealed under a clear topcoat. The most popular choice for Reno garages — it hides tire marks, dust, and daily wear.
—Wide range of blended chip colors
— Textured, slip-resistant finish available
— Best for daily-use garages and shops
System 02
Metallic Epoxy
Pigments are hand-worked into the epoxy to create a marbled, three-dimensional look with real depth and movement. A statement floor for showrooms, garages, and living spaces.
—Custom color blending on-site
— High-gloss or satin topcoat options
— Ideal for showrooms and feature spaces
System 03
Commercial Systems
A clean, uniform color coat built for high-traffic and industrial environments. Formulated for chemical resistance, easy cleaning, and heavy foot or vehicle traffic.
—Chemical- and abrasion-resistant formulas
— Anti-slip additive available
— Suited to warehouses, shops, and offices
System 04
Installation Process Overview
Every floor is diamond-ground, crack-repaired, and moisture-tested before a single drop of epoxy goes down — see the details below.
● Preparation
The prep work most crews skip
Epoxy only bonds as well as the surface underneath it. This is where a floor is won or lost.
Diamond Grinding & Concrete Preparation
We mechanically grind every slab to open the concrete pores and remove existing coatings, oil, and laitance. This gives the epoxy a mechanical bond instead of relying on adhesion alone — the single biggest factor in whether a floor peels down the road.
Crack Repair & Moisture Mitigation
Cracked concrete can still be coated once it’s properly routed and filled. Before we start, we run a moisture test on every slab; if vapor levels are high, we apply a moisture-mitigation primer so the epoxy doesn’t blister or delaminate later.
● Installation Process
From first walkthrough to final cure
01
Inspect & Test
On-site walkthrough, moisture test, and scope of work.
02
Grind & Prep
Diamond grinding removes coatings and opens the surface.
03
Repair
Cracks routed and filled; moisture primer if needed.
04
Coat & Broadcast
Base coat applied, flake or metallic pigment worked in.
05
Seal & Cure
Topcoat sealed; floor cures before foot and vehicle traffic.
● Why Da-Vinci
Built by people who prep the floor right
Licensed & Insured
C-5 #0090548 and C-18 #0094850 — fully licensed, bonded, and insured on every job.
Proper Surface Prep
Every slab is diamond-ground and moisture-tested, not just cleaned and coated.
Local to Northern Nevada
We know how the high-desert climate treats concrete and formulate accordingly.
Straight Answers
Clear estimates and honest timelines — no surprise add-ons after the deposit.
● Customer Reviews
What Reno homeowners are saying
● Service Areas
Epoxy flooring across Northern Nevada
● FAQ
Epoxy flooring questions, answered
How much does epoxy flooring cost?
Pricing depends on square footage, concrete condition, and which system you choose — solid color runs lower, full-broadcast flake and metallic run higher because of the extra material and labor. We’ll give you an exact number after a quick walkthrough or a few photos; use the form on this page for a free estimate.
How long does installation take?
Most single garages are done in 2–3 days from grinding to final topcoat, including cure time between layers. Larger commercial floors take longer depending on square footage and prep work needed.
When can vehicles return to the garage?
Foot traffic is typically fine within 24 hours, but we recommend keeping vehicles off the floor for at least 72 hours so the topcoat reaches full cure strength.
Will it resist hot tires?
Yes — our systems use a urethane topcoat rated for hot tire pickup, which is common in Reno garages where summer pavement temperatures get high.
Can cracked concrete be coated?
In most cases, yes. We route and fill cracks and run a moisture test before coating. Active structural cracks or major heaving may need concrete repair first — we’ll flag that during the estimate.
What's the difference between flake and metallic?
Flake broadcasts color chips across the base coat for a textured, speckled look that hides everyday wear. Metallic blends pigment directly into the epoxy for a marbled, glossy finish with more visual depth — it’s more of a showpiece floor.
Can epoxy yellow over time?
Standard epoxy topcoats can yellow with UV exposure. We use UV-stable urethane topcoats specifically to prevent that, which matters for garages that get direct sun through a window or open door.
How do I clean an epoxy floor?
Sweep or dust-mop regularly and clean spills with a mild soap and water — no harsh solvents needed. That easy upkeep is one of the main reasons people upgrade from bare concrete.
● Ready When You Are
Get your free epoxy flooring estimate
Reno, Sparks, and Northern Nevada. Licensed, bonded, and insured — C-5 #0090548 / C-18 #0094850.